blue background

Online library

    KULI Online library
  • Automatic Creation of Radiator Files from Excel
    10.06.2014
  • KULI-System

    The COM interface, developed by Microsoft®, provides a standardized interface for programs to communicate with each other. KULI components has a set of built-in COM commands, which allows external programs to create KULI component files.

    The part of KULI components that allows to save component files is implemented as a dynamic link library (DLL). This KuliCompInterface.dll can be called by any other application that supports COM. The current example is a simple demonstration of the KULI compinterface. An Excel datasheet for KULI input of a radiator component has an integrated button that allows to store the data directly as an *.kulirad-file.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI CompInterface + KULI MediaX


    KULI File, 131 KB
    Documentation, 427 KB
    Please login for Download.
  • Engine Modeled with Point Masses
    10.06.2014
  • KULI-System

    Only transient simulation allows using the full potential of computer aided engineering regarding component sizing & packaging.
    For the simulation of realistic temperature profiles the thermal capacities of the engine should be considered.

    In this example the existing engine component from KULI drive is remodeled using the primitive components point mass and heat conduction. The engine can be modeled as two direct masses and two indirect masses.The direct masses are heated by combustion processes, and exchange heat with each other, the oil and the water circuit respectively, the ambient air and with the indirect masses. The indirect masses exchange heat via conduction with their respective direct mass only.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI drive


    KULI File, 17 KB
    Documentation, 146 KB
    Please login for Download.
  • Example of a Hybrid Passenger Car
    10.06.2014
  • KULI-System

    In this example we will investigate, how to model a hybrid passenger car with KULI. We will especially focus on the electric components and their integration into the overall cooling system.

    Focus on

    • Battery model (module level)
    • Module temperatures
    • Coolant temperatures
    • State of charge Simulation
    • Electric motor and power electronics
    • Cooling system integration
    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI drive


    KULI File, 111 KB
    Documentation, 3 MB
    Please login for Download.
  • Modelling a Fan Control
    10.06.2014
  • KULI-System

    The aim of a decent fan control strategy is to provide adequate air flow for the cooling system at minimum fan power and noise.

    The KULI controller objects enable to implement an arbitrary  control strategy for system optimization. 

    In the subsystem Fan control the controlling information is set up. For comfortable use you can change the values for the temperatures for changing the fan stage and the fan stages itself in the inner circuit window. 

    Based on the fan (electrical or mechanical fan) the fan stage or the fan speed can be used as the controlled parameter. In the provided model an electrical fan switches on as the air temperature rises above 60°C and switches off as the temperature falls below 55°C. The transient aspect of the example is the hysteresis which can be modeled using a delay controller. For better system overview the control strategy is packed into a KULI subsystem.

    Usable from release: KULI 9.1-0.01
    Necessary modules: KULI base


    KULI File, 160 KB
    Documentation, 174 KB
    Please login for Download.
  • Thermostat Modelling
    10.06.2014
  • KULI-System

    In the coolant circuit the thermostatic valve is one of the most important control units to maintain the system’s desired set point temperature. Due to its mechanical technology usually the thermostat has some delay in its reaction, which should be considered in transient cycle simulation. This example is based on the tutorial example ExEngine. The major modification is that it includes a more detailed model for the thermostat, placed in the subsystem “Thermostat”.

    The main idea is that a fluid point mass models the wax element including the metal housing of the thermostat. This point mass is responsible for the hysteresis of the thermostat. The mass of the point mass can be adjusted to fit the current application; moreover, also the heat transfer coefficient from the coolant to the mass can be adjusted, even depending on the flow rate. A corresponding characteristic line is prepared (but contains only a single value in this demo example). 

    The temperature of the mass (i.e., of the wax element) is then taken into a characteristic line in which the lift opening (between 0 and 100%) of the thermostat is calculated. Based on this lift opening two fluid resistances are calculated that have opposite behavior: If the temperature is still low, then the resistance of the bypass will be low, the resistance of the exit to the radiator branch will be high. If the temperature is high, then it is vice versa. 

    The example is given for a thermostat working as a branch; the method would work in the same way for a thermostat working as a confluence.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI drive


    KULI File, 24 KB
    Documentation, 224 KB
    Please login for Download.
  • Viscous Clutch
    09.06.2014
  • KULI-System

    This subsystem models a viscous clutch via a point mass.

    The warming up hystereses are defined via the following inputs:

    • Mass of the point mass (represents the housing + the fluid inside the viscous clutch)
    • Heat transfer coefficient: defined over a characteristic curve dependent on the air mass flow (the higher this value is, the lower is the difference between engaging- and disengaging temperature)
    • Engagement Ratio: defined over a 3D-map dependent on engine revolutions and the temperature of the point mass (the median of the hysteresis in the disengaged case is defined via the temperature of mass for 0% engagement and the median of the hysteresis in the engaged case is defined via the temperature of mass for 100% engagement, thus the slope of the hysteresis is defined as well, see the green curves in the picture below)

    Furthermore the transmission ratio from engine speed to the input speed of the viscous clutch is modeled via a constant factor. And the transmission from the clutch-input speed to the fan speed is modeled via a 3D-map (“fan_rpm”) dependent on the engagement Ratio.

    Usable from release: KULI 9.1-0.01
    Necessary modules: KULI base + KULI drive


    KULI File, 10 KB
    Please login for Download.
  • Modelling Tanks
    23.05.2014
  • KULI-System

    Charge air cooler tanks may have a big impact on the efficiency of the heat exchangers behind. A simple approach to model those effects in KULI is the use of area resistances to block the air flow in the area where the tanks of the charge air cooler are located.

    The area resistances correspond to the size of the real -life tanks.To consider the high air resistance typically caused by the tanks a high pressure loss coefficient has to be set. To model the local impact regarding the heat exchanger surfaces the area resistances simply can be integrated to the cooling package using the KULI block function.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base


    KULI File, 99 KB
    Documentation, 209 KB
    Please login for Download.
  • Adding a Heater Matrix to a Cooling System
    23.05.2014
  • KULI-System

    The heater matrix uses coolant to warm the air that enters the passenger cabin. Of course, this can influence the behavior of the complete coolant water circuit. This example illustrates how to add a heater matrix to a System. 

    To take care of an additional heater matrix in an existing KULI cooling system one has to add a radiator component to the KULI system. On the fluid side it is integrated to a normal coolant circuit using branch and confluence components. On the air side it is necessary to use two parallel branches to simulate separate air paths for the engine cooling part and for the HVAC part. The example is based on the basic example “Ex_Fluid.scs” from the KULI installation setup.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base


    Lectures, 197 KB
    Documentation, 189 KB
    Please login for Download.
  • Advanced Cabin for Cool Load Determination
    23.05.2014
  • KULI-System

    In the passenger compartment typically a certain comfort temperature is demanded. In concept phase where only a few data are available, KULI supports the engineer in finding the required evaporator cool load to achieve the design temperature.

    The current example represents a very basic configuration of an HVAC system. Air duct, blower and evaporator are simply modeled by heat flow sources, temperature- and mass flow targets with input based on rough assumptions. Using this model, the user can optimize the evaporator air outlet temperature such, that the evaporator cool load will lead to the desired cabin temperature.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI advanced + KULI hvac + KULI drive


    KULI File, 22 KB
    Documentation, 3 MB
    Please login for Download.
  • Cabin Cool Down Simulation with Partial Recirculation
    23.05.2014
  • KULI-System

    In the vehicle HVAC system air recirculation mode is used to reach a desired temperature faster and to prevent from bad outdoor smell. On the other hand passenger air quality may suffer from the recirculation. An approach to keep the advantage of recirculation but reduce its disadvantage is the use of mixed air.

    The current example is based on “Ex_AC_cool_down_recirc.scs” from the KULI installation setup. Here, the user can set a proportion of fresh and recirculation air that will blow into the cabin.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI hvac + KULI drive
    Kuli File

    KULI File, 104 KB
    Please login for Download.
  • Condenser Testbench Simulation
    23.05.2014
  • KULI-System

    On the standard condenser test bench the refrigerant inlet and outlet conditions are fixed and the refrigerant mass flow is the test result. For plausibility checks or for calibration: The corresponding KULI model allows a virtual reproduction of the test bench situation.

    The refrigerant condition can be defined by inlet-temperature,-pressure and outlet-subcooling value (à CND-Test_VariantEntryTemp.scs). The air inlet condition is fixed, the air flow can be varied to test for different operating points. The condenser test bench is packed to a subsystem and does not require the user’s attention in first instance. Test results like refrigerant mass flow, heat transfer and pressure loss are collected in another subsystem . Variants of the test bench model require inlet superheat instead of inlet temperature or mean pressure instead of inlet pressure as input (à CND-Test_VariantEntrySH.scs, CND-Test_VariantEntrySH(meanPressure).scs).

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI advanced + KULI hvac


    KULI File, 33 KB
    Documentation, 1 MB
    Please login for Download.
  • Control Strategy for Cabin Air
    23.05.2014
  • KULI-System

    In the passenger compartment typically a certain comfort temperature is demanded. A possible control strategy to reach comfort level is the use of a PID controller.

    The input of the controller is the deviation of the actual temperature to the reference temperature of 22°C. The output value affects e.g. an electro heater with the purpose of minimizing the temperature gap.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI hvac + KULI drive


    KULI File, 23 KB
    Documentation, 167 KB
    Please login for Download.
  • Direct CFD Interface
    23.05.2014
  • KULI-System

    In real-life cooling packages there will be an non-uniform air flow distribution on heat exchangers, which can have a big effect on heat transfer rate. Using CFD results with KULI it is possible to consider this uneven air flow on heat exchangers.

    In the KULI direct CFD interface method *.txt-files containing a velocity distribution from CFD calculation and *.txt-files for writing output like a temperature distribution have to be defined. Unlike the standard/variable resistance matrix method, the direct CFD interface does not require the preprocessing step of calculating a matrix of local resistance corrections. Also unlike the two other methods, here the influence of fans or cp-values on the system air flow are neglected, the system airflow is taken directly from the velocities of the CFD input file. The big benefit of this method is, that KULI can be directly integrated in CFD code, e.g. for iterative underhood computation.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI advanced


    KULI File, 11 KB
    Documentation, 195 KB
    Please login for Download.
  • Example of a Commercial Truck
    23.05.2014
  • KULI-System

    This example compares the thermal simulation of a truck cooling system and a simple driving simulation. This proceeding allows the evaluation of the coolant temperatures and the determination of the consumption for a defined driving cycle.

    Focus on

     

    • Engine cooling system
    • Electrical water pump
    • Flow control unit
    • Thermostat and fan control

    Other results

     

    • Fuel consumption

    Input Data

     

    • Driving cycle (rpm, torque)
    • Ambient conditions, ...

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI hvac + KULI drive


    KULI File, 1 MB
    Documentation, 2 MB
    Please login for Download.
  • Example of a Hybrid Truck
    23.05.2014
  • KULI-System

    In the past few years hybrid vehicles have been in the center of automotive engineering efforts, in particular in the field of passenger cars. But hybrid powertrains will also be important for commercial trucks. This focus on hybrid vehicles leads to high demands on thermal management since the additional components in a hybrid vehicle need appropriate cooling or even heating.

    Focus on

    • Engine cooling system
    • Hybrid thermal Management

    Other results

    • Dimensioning of the cooling components
    • System integration
    • Concept investigations
    • Fuel consumption

    Input Data

    • Driving cycle (rpm, torque)
    • Ambient conditions, ...
    Usable from release: KULI 10
    Necessary modules: KULI base + KULI hvac + KULI drive


    KULI File, 329 KB
    Documentation, 4 MB
    Please login for Download.
  • Example of an Electric Passenger Car
    23.05.2014
  • KULI-System

    Beside conventional tasks in energy management, KULI software provides excellent opportunities for the simulation of hybrid- and pure electric vehicles.

    This example compares the influence in power consumption of a mid-sized electric car with and without preconditioning (e.g. during a connection with a charger is established).

    Focus on

    • Battery Conditioning System
    • Cabin Conditioning System
    • Power consumption (with / without Preconditioning)

    Other results

    • Battery SOC
    • Temperature distribution in advanced cabin model (2 row, head – torso – legs for driver and passengers)

    Input Data

    • Battery data (capacity, number of cells, cell voltage)
    • State of Charge (SOC)
    • Initial values (cabin temperature, cell temperatures,..)
    • Boundaries: Ambient temperature, solar intensity, ..
    • Driving cycle (rpm , torque)
    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI drive


    KULI File, 3 MB
    Documentation, 3 MB
    Please login for Download.
  • Heat Pump Cycle with Refrigerant R 134a
    23.05.2014
  • KULI-System

    An extended application of the refrigerant cycle is the use as a heat pump, where the evaporator is used as an auxiliary heater. KULI enables to perform quick analysis of heat pump concepts.

    In the corresponding KULI model the real-life evaporator is set up as an KULI condenser-model and vice versa the real-life condenser is set up as an KULI evaporator-model. For investigations in very cold ambient temperatures, where refrigerant low pressure level might fall below ambient pressure an extended media property file of Refrigerant R134a is attached to the example. Sensors and actuators on the inner circuit sheet of KULI allow a good overview on system parameters and results.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI hvac


    KULI File, 175 KB
    Documentation, 208 KB
    Please login for Download.
  • Hot Gas Cycle with Refrigerant CO2
    23.05.2014
  • KULI-System

    Especially in HVAC systems using CO2 as refrigerant the evaporator can be used as an auxiliary heater. This can be implemented by switching of the condenser which leads to a triangular process.  

    In the corresponding KULI model the condenser simply does not exist. For convergence of the calculation model the operation mode “Hot gas cycle mode” has to be activated in the refrigerant circuit definition.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI hvac


    KULI File, 31 KB
    Docmentation, 165 KB
    Please login for Download. Please login for Download.
  • KULI / AVL CRUISE – Coupling with Driving Simulation
    23.05.2014
  • KULI-System

    The COM interface, developed by Microsoft®, provides a standardized interface for programs to communicate with each other. KULI has a set of built-in COM commands, which allow other programs to run and control a KULI simulation. 

    The current example is demonstration of KULI integrated in a driving simulation software like AVL CRUISE. Here there focus is on the impact of the A/C compressor driving power on the vehicle performance. This example also can be found in the AVL CRUISE tutorial. The KULI *.scs-file is contained in the folder “userdata”.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI advanced + KULI hvac + KULI drive


    KULI File, 158 KB
    Documentation, 222 KB
    Please login for Download.
  • KULI / EXCEL - Change of Files and Other Properties
    23.05.2014
  • KULI-System

    The COM interface, developed by Microsoft®, provides a standardized interface for programs to communicate with each other.

    KULI has a set of built-in COM commands, which allow other programs to run and control a KULI simulation. 

    The current example is a simple demonstration of KULI controlled by Microsoft EXCEL. For a certain cooling system the mechanical fan is varied and its performance regarding mass flow and power demand is output. Input and output parameters in the KULI file are defined by so-called COM objects. 

    The example is based on “ExTruck.scs” from the KULI installation setup.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI advanced


    KULI File, 29 KB
    Documentation, 419 KB
    Please login for Download.
  • KULI / EXCEL - Reading Direct Access Information from KULI File
    23.05.2014
  • KULI-System

    The COM interface, developed by Microsoft®, provides a standardized interface for programs to communicate with each other. 

    KULI has a set of built-in COM commands, which allow other programs to run and control a KULI simulation. KULI “Direct Access” allows to set and get component parameters of a cooling system without defining COM-objects in the *.scs-file. Hence, using Direct Access, a KULI file does not have to be prepared to be controlled by external programs but can be accessed directly, “as it is”. For the user this leads to a remarkable advantage regarding set-up time of the KULI cooling system. The current Excel sheet enables to list all accessible components of a defined cooling system. Furthermore, a list of all possible direct access attributes is provided.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI advanced


    KULI File, 109 KB
    Documentation, 521 KB
    Please login for Download.
  • KULI / EXCEL – Steady State Simulation
    23.05.2014
  • KULI-System

    The COM interface, developed by Microsoft®, provides a standardized interface for programs to communicate with each other. KULI has a set of built-in COM commands, which allow other programs to run and control a KULI simulation.

    The current example is an Excel sheet which is created for the control and simulation of one steady state operating point of a cooling system. The certain benefit of this Excel sheet is, that no Visual Basic programming knowledge of the user is required. Input and output parameters of a KULI file can simply be defined in a list, where the parameters can be chosen from an interactive menu. The sheet allows access to standard KULI COM objects but also to components directly via the KULI Direct Access interface. If optimization parameters and targets are set in the KULI *.scs-file, one can simply run the optimization from Excel by activation of the “Run Optimization” option.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI advanced


    KULI File, 63 KB
    Documentation, 416 KB
    Please login for Download.
  • Modeling Recirculation
    23.05.2014
  • KULI-System

    In a real cooling package the air is not always guided through sealed shrouds, so there exist several leakages.

    With KULI it is possible to model such leakages and even recirculation paths. 

    This example is based on the Tutorial Example ExTruck. 

    It shows how to model a leakage and a recirculation path such that the ratio of the air mass flow through radiator / inlet grid varies for different operating points between 70% – 130%. 

    The leakage is modeled via an area resistance below the main cooling package and the recirculation path is regulated via a second built in resistance. 

    The advantage of this modeling is that there is used the same cp-value and the same built-in-resistance for several operating points.

    Usable from release: KULI 9.1-0.01
    Necessary modules: KULI base


    KULI File, 40 KB
    Documentation, 243 KB
    Please login for Download.
  • Optimization on two Targets with two Parameters
    23.05.2014
  • KULI-System

    KULI advanced offers  an optimization toolbox which can be used for  quick parameter variation on one hand, and automatic minimization, maximization or goal seek on the other hand.

    The current example is a cooling system with goal seek on two targets, and two parameters respectively. The speed of the mechanical fan and the heat rejection of the radiator are adjusted to hit the target of a given radiator top hose temperature and a given charge air exit temperature. The cooling system is based on tutorial example ExCar.scs from the KULI Setup.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI base + KULI advanced


    KULI File, 104 KB
    Documentation, 177 KB
    Please login for Download.
  • Statistic Monte Carlo Simulation to Evaluate the Influence of Uncertain Input Data
    23.05.2014
  • KULI-System

    KULI advanced offers  an optimization toolbox which can be used for  quick parameter variation on one hand, and automatic minimization, maximization or goal seek on the other hand. Based on those functions it is possible to perform statistical analysis as well. 

    This example shows the application of the Monte Carlo Method in KULI. The basic idea is that some input parameters do have a certain degree of uncertainty. In this example we assume that the charge air temperature has a temperature of 150°C, but we are not sure, so we apply a normal distribution with mean 150°C and a standard deviation of 10 K. Furthermore we assume that the built in resistance has a zeta of 400, again with some uncertainty resulting in a normal distribution with mean 400 and standard deviation of 10. And finally we assume that we don’t really know the exit cp-value; since we can’t even guess a mean value we apply a uniform distribution between -0.4 and -0.2. When we run this model we choose „Monte Carlo Simulation“ with a sample size of e.g. 500. A possible output is mean value and standard deviation of water and charge air temperatures.

    Usable from release: KULI 8.0-1.04
    Necessary modules: KULI advanced


    KULI File, 112 KB
    Documentation, 181 KB
    Please login for Download.