KULI advanced offers an optimization toolbox which can be used for quick parameter variation on one hand, and automatic minimization, maximization or goal seek on the other hand.
The objective of the current examples is the calibration of the simulation model to measured temperatures by adjusting the Resistance Parameter of the Built-In-Resistance. This adjustment can be done automatically using the KULI optimization toolbox. Two variants for the calibration are presented. Variant 1 shows how to set up the optimization controllers if the user wants to find the optimum parameter for each single operating point. Variant 2 shows how to set up the optimization controllers if the user wants to find one optimum parameter for all operating points. The cooling system is based on tutorial example ExCar.scs from the KULI Setup.Usable from release: KULI 8.0-1.04