blue background



KULI 13 includes:

  • Redesign of the architecture of the calculation kernel of KULI, ensuring full and consistent 64bit support as well as better memory handling and system stability
  • Extension of the dynamic solver, in particular the parallel flow cooler and oil circuits are now supported, initial temperatures of tubes and circuits can be set via actuator, etc.
  • Reduction of the calculation time based on changes of user defined formulas in the calculation controller, logging mechanism, and the kind of calculation of material properties
  • Support during opening of scs-files with the option to automatically unpack missing components
  • Quickly find sources of a signal receiver via context menu.
  • Additional sensors and actuators for passenger compartment and EXV
  • Additional refrigerants R290, R32, R454c and R410a based on NIST standard
  • Easier selection of results in the project tree of KULI lab with the help of a filter
  • Possibility to change the units given in axes of 2D charts in KULI lab
  • Enhanced message and error logging mechanism

KULI 13.1 includes:

  • Complete revision of AC solver: The AC solver has undergone a complete revision with the following benefits: 
    • Better stability 
    • Support of more configurations 
    • Better detection of problems caused by questionable data.
    • In addition a lot of hints have been included in order to assist the user in finding the cause of incorrect circuit configurations. 
    • The online help has been updated to provide guidelines how to set up valid A/C circuits. 
  • COM objects can now be marked as explicit FMU connectors
  • Enhanced Messaging regarding status of result file writing

KULI 13.2 includes:

  • AC-solver improvements: 
    • Calculation of the temperature of point masses in the phase transition area has been corrected 
    • Higher convergence speed when using a TXV with defined superheating 
    • AC solver enhancements to improve convergence robustness 
  • Additional options for fine tuning the solver when simulating heat conduction network
  • Additional fan data from the fan manufacturer TRUFLO have been added to the KULI installation

KULI MediaX 14:

  • Support of 32-and 64-bit COM clients.
  • Modified licensing: Now only LM-X license manager is supported.

KULI FMU Support:

  • A KULI thermal model can now be exported as an FMU for co-simulation supporting the FMI 2.0 standard.
  • The KULI FMU is self-contained, which means that no KULI installation is required on the target machine.
  • The FMU interface is fully defined in KULI by using well known modelling techniques.
  • With the help of the KULI FMU generator, the KULI model can then be exported as an FMU with only a few steps (see the download link below).
    KULI add ons
  • Setup KULI MediaX 14.0.1
  • Normal
    Software, 67 MB
    Please login for Download.
  • KULI FMU Generator
  • Normal
    Software, 8 MB
    Please login for Download.
  • Setup KULI 13.1 CompInterface
  • Normal
    Software, 42 MB
    Please login for Download.
  • KULI Simulink Toolbox v6.8
  • Normal

    Installation Instructions: 

    1. Extract the Zip file to any directory, e.g. your Matlab working folder.

    2. In Matlab, set the current folder to the unpack directory.

    3. Execute "installKuliTB.m".

    Software, 1 MB
    Please login for Download.
    KULI 13.2
  • Setup KULI 13.2
  • Normal
    Software, 332 MB
    Release Notes, 170 KB
    Please login for Download.