blue background

Online Library

  • Temperature control: Recirculation ratio
  • KULI-System

    One possibility to set a target temperature in the cabin is to control the amount of recirculation.
    This example demonstrates how a subsystem including several calculation controllers can easily be added to an existing HVAC simulation system.

    By adjusting the recirculation rate, the cool down ( heat up) performance of the cabin is influenced. This controlling strategy is included in a subsystem which mainly consists of calculation controllers. 

    As a necessary input, the user has to define a required cabin temperature and the upper and lower limit for the recirculation rate. The calibration coefficient is a kind of recirculation offset for the controller, used in each simulation time step. 

    If the average cabin temperature exceeds the upper temperature limit plus the temperature tolerance, the max. recirculation rate. 

    In all other cases the recirculation rate is reduced or increased by the calibration coefficient. Due to the change of the recirculation in each simulation time step, a smooth control characteristic is created.

    Usable from release: KULI 9.1-0.01
    Necessary modules: KULI drive + KULI hvac

    KULI File, 17 KB
    Documentation, 1 MB
    Please login for Download.